Рейтинг@Mail.ru

Secondary packaging carton

Case Sealer Hot Melt

Case Sealer Hot Melt


TECHNICAL DATA


Case Sealer D35HM with Hot-Melt

MONOFORMAT automatic case sealer. Case height and width can be manually adjusted with cranks.
Fitted with an automatic top flap folding device.
Sealed with hot-melt glue from top or bottom (H1) or top and bottom (H2).
The machine applies hot-melt glue to front and rear flaps for top glueing and to side flaps for bottom glueing. Automatic flap folding once hot-melt glue has been applied. Case comes out of the sealer completely sealed.

Case Sealer L35HM with Hot-Melt

MONOFORMAT automatic case sealer. Case height and width can be manually adjusted with cranks.
Fitted with an automatic top flap folding device.
Sealed with hot-melt glue from top or bottom (H1) or top and bottom (H2).
The machine applies hot-melt glue to front and rear flaps for top glueing and to side flaps for bottom glueing. Automatic flap folding once hot-melt glue has been applied. Case comes out of the sealer completely sealed.

Accessories

RBE Roller Section 

Free roller conveyor, joined to infeed an outfeed of case sealers.

Side Drives 
Side Drives of different belt widths to be used for heavy cases and raised for unstable cases.
Flap Folder S35 

This accessory facilitates flap folding. The case is introduced into the machine and rear flap is closed manually. Front and side flaps are folded automatically.

Top Pneumatic Tightener 
Side pressure skids with automatic adjustment to carton to prevent top flaps from opening when cartons are over filled-up.
Elevated Pillars 
Elevated pillars to increase maximum height of the cases to be taped.
Dispensers 

Dispenser for tape in width ranking from 50-75mm; Tape overlap from50-75mm. Dispenser is also be available in other widths.

Braked Castors 
All case sealers are prepared for the fitting of brake castors to facilitate movement
Extended Legs 
Extended legs help increase the maximum height of machine conveyors.
Infeed Controllers 
Used for automatic case infeed and separation control.
Case Feeder and Centering DC500 
Case doser and centering to automatically control the infeeding and separation of the cases to be taped by automatic sealers.
Desviador de cajas a 90º E650 
Pneumatic pusher fitted to drive carton, changing progress direction 90 degrees from one conveyor to another.
Extendible Wheel Conveyor 

The extendable roller conveyors can be adapted to different curves and lengths and give flexibility to the end-of-line transport of light loads.

Flapshold Carton Holder 

Low carton holder during fill in box process.

Alarm end belt 
Warning device to detect tape break or end with a warning signal and stopping the machine.
Safety Fences 


EXPLORE ANOTHER EQUIPMENT: